| NC-swivel head (B-axis) |
Controlled NC-swivel milling head (B-axis)
with clamping in position. Continuously positioning NC swivel milling
head with integrated motor spindle for 4/5 axes positioning and
simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 /
1,696 ft |
| Cabine |
Full protection cabin |
| Spindle speed 15,000 rpm, 200Nm |
Motor spindle speedMASTER® HSK-A63 Spindle speed
20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm /
130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) |
| Rigid table with integrated rotary axis
(leftside) |
Rigid table with integrated round table Ø 1050 mm
// 41.3 in located left side of table table load max. 1,200 kg //
2,644 lbs hydraulic clamped in position |
| Removable partition wall DMF |11 |
Partition wall removable for pendulum machining, 2
working spaces |
| Tool magazine 90 places |
Tool magazine 90 places SK40/HSK-A63 Chain type
with double gripper |
| Inner coolant supply 40Bar/980l |
Internal coolant supply (ICS) with paper type
filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear
window, air purge for linear measuring system, rotary joint for main
spindle |
| Chip flushing for working area |
Flushing for working area Additional flushing of
the working area doors and cabin sidewalls, Bed flushing included
(only available starting internal coolant supply 980l) |
| Head flushing |
Head flushing for machines with SK40/SK40
BIG-PLUS®, BT40 / BBT40 or CAT40 at machines with HSK-A63 it is
standard Note: Option is deactivated in case of function M8 |
| Oil mist separator (with partition
wall) |
Oil and emulsion mist separator system 2 pieces
per machine implemented in right and left cabin side wall. mechanical
filter system 2x1600 m³/h |
| Minimum lubrication external |
Minimum lubrication external for vertical or
swivel head |
| Air blast through spindle centre |
Air blast through spindle centre activated by M
function, maintained air, low oil rate possible |
| Infrared measuring probe PP 600
optical |
Infrared touch Probe type Renishaw PP600 optical
(OMP600) |
| 3D quickSET elevated constructuion |
3D quickSET Tool kit for control and compensation
of the cinematic accuracy of 5 axis machine configurations include
additional fixture for elevated construction (only with option touch
probe) |
| Tool laser measuring Blum |
Laser tool measuring Blum LC50 DIGILOG Measurement
of length and diameter Automatic cleaning with external air blast
Calibration Tool with tool holder (not with TT 140/160 possible, for
pendulum machining, please order 2 pieces) |
| Tool breakage control mechanical |
Tool breakage control mechanical version checkable
tool length 55 to 400 mm |
| MPC Machine Protection Control |
MPC Machine Protection Control Machine protection
by quick shutdown |
| Signal lamp 4-colour |
Signal lamp, 4 colours |
| Automation Interface partition wall, for
left working area |
Automation interface for partition wall mode for
one-side loading left according to DECKEL MAHO Standard consisting of:
Interface (Profibus) via M65 Automatic loading via working area door
4-chanel energy supply to machine table (No change possible to
oth |
| Door drive for working area
doors |
Door drive for working area doors Open / close -
activated by two-hand-operation at the control panel Safety sensor
technology for prevention of accidents |
| Laminated safety glasses |
Laminated safety glass for Windows in the two
front doors |
| Operation mode 4 |
Operation mode 4 Process monitoring in the
production Manual intervention with open doors of machining area.
Release after check list has been filled in. |
| Stop block Speedmaster |
Stop block HSK-A63/SK40/CAT40 for Speedmaster
spindle |
| ATC (Application Tuning Cycle) |
ATC (Application Tuning Cycle) programmable feed
parameter selection for machining task: accuracy/surface/speed |
| Interpolation turning 2.0 |
Interpolation turning 2.0 for the machining of
internal and external diameter using spindle orientation with the
possibility of free contour programming |
|
|
| Digital Manufacturing Package |
Digital Manufacturing Package (1) IoTconnector
Allows the use of the Online services from DMG MORI (2) Machine Data
Connector (MDC) Standardized machine data interface Protocols: OPCUA,
MTConnect, MQTT (3) NETservice Qualified support through
internet-b |
| Service Agent |
Service Agent Overview of all maintenance work on
the machine |
| Messenger V4 |
The latest version of DMG MORI Messenger displays
web based the machine live status. It allows to analyze the machine
run-time, downtime, alarms in individually configurable dashboards
and transparently shows the actual status in the manufacturing
shop |
| Transportation traverse DMF 300|11 |
Lifting frame for use with crane |
| Special equipment |
Preparation for clamping hydraulics as preparation
(no def. control): 4 lines on the integrated rotary table on the left,
4 lines on the rigid table on the right (unused) |